Molds produce tiny spores to reproduce. Mold spores waft through the indoor and outdoor air continually. When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive. There are molds that can grow on wood, paper, carpet, and foods. When excessive moisture or water accumulates indoors, mold growth will often occur, particularly if the moisture problem remains undiscovered or un-addressed. There is no practical way to eliminate all mold, and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture. http://www.epa.gov/iaq/molds/index.html The key to mold control is moisture control. It is important to dry water damaged areas and items within 24-48 hours to prevent mold growth. If mold is a problem in your home, clean up the mold and get rid of the excess water or moisture. Fix leaky plumbing or other sources of water. Wash mold off hard surfaces with detergent and water, and dry completely. Absorbent materials (such as ceiling tiles & carpet) that become moldy may have to be replaced. Water quality is probably the most common concern and the one most often tested for. Typically, a basic water quality test will check pH, water hardness, the presence of fluoride, sodium, iron and manganese, plus bacteria such as E-coli. Additionally, water may be tested for the presence of lead or arsenic. In homes built before 1978, lead based paint may be present. Generally, if the lead based paint is in good condition, not cracking or peeling, it is not a hazard. If the condition is hazardous, the paint will either need to be removed or sealed in such a manner as to eliminate the hazard. Another common environmental concern with the home is radon. Radon is a radioactive gas that comes from the natural decay of uranium in the soil. Pretty much all homes have some radon present; tests can determine if the level present is higher than what is considered safe. If the level is too high, a radon reduction system will need to be installed.http://www.epa.gov/radon In older homes built more than 30 years ago, asbestos was used in many types of insulation and other building materials. If the asbestos is releasing fibers into the air, it needs to be removed or repaired by a professional contractor specializing in asbestos cleanup. But, if the asbestos material is in good repair, and not releasing fibers, it poses no hazard and can be left alone. |
JA Construction Services LLC |